Mentioned Points on Vibrating Feeder

Mentioned Points on Vibrating Feeder

1. In order to ensure feed materials uniformly and prevent materials flow automatically, the vibrating feeder should be installed horizontally. If feeding ordinary materials, users can install the feeder declined 10 degree; declined 15 degree is alright if dealt with viscous material or larger water content materials.

2. There should be 20mm moving clearance after installing vibrating feeder. Suspension device should adopt flexible connections.

3. Please tighten all bolts before commissioning with non-load, especially the vibration motor bolt. It’s better to tighten the bolts again after 3-5 hours of continuous operation.

4. When making a commissioning, two vibration motors must rotate reversely. Inspect the stability of current and noise, please stop it if there is abnormal situation.

5. Please add lubricating grease to motor bearings every 2 months. During hot season, every month should be added.